BLOX Racing Titanium Extended Wheel Stud, M12x1.25mm - Single Piece - Subaru Fitment

BLOX Racing Titanium Extended Wheel Stud, M12x1.25mm - Single Piece - Subaru Fitment is the BLOX Racing product identified by manufacturer part number BXAC-00180. Use the complete part number when checking application, finish, size and pack quantity.

Verified product identity

• Manufacturer: BLOX Racing
• Manufacturer part number: BXAC-00180
• Supplier catalogue description: Titanium Extended Wheel Stud, M12x1.25mm - Single Piece - Subaru Fitment
• Supplier catalogue family: EXTENDED WHEEL STUDS
• Listed shipping weight: 0.15 lb
• Listed package dimensions: 5x5 bag in

Application and specification note

TI64 M12x1.25 thread - Single piece

Product details

Features

• Manufactured From Ti64 Titanium
  
• Reduce Rotational Mass
  
• Corrosion & Fatigue Resistant
  
• Each Extended Stud Weighs Approximately 34 Grams

Wheel Stud Specs

• Thread pitch: 12x1.25mm
• Total length: 78.85mm
• Thread length: 58mm
• Head diameter: 20mm
• Base thickness: 2.85mm

We are proud to introduce a solution to common wheel stud failures - our new Blox Racing Xtreme Titanium Wheel Studs. These lightweight wheel studs are manufactured from aerospace grade Ti64 Titanium. We chose Titanium for our Xtreme line, because it is resistant to the constant heating and cooling cycles common to wheels that will destroy steel studs and bolts. Our Xtreme Wheel Studs will not corrode or rust and they offer 50% in weight savings over old school steel studs. Upgrade to our New Titanium Wheel Studs today and never get a failed stud again!

WHAT YOU NEED TO KNOW:

> Subaru models up to 2007 do not require the hub to be pressed out to install Blox Xtreme Titanium Wheels Studs; 2008+ models require the hub to be removed.

> If you use our titanium studs and titanium lug nuts you must use generous amounts of anti-sieze to avoid galling.

> Precision Ti64 spline results in no welding or spinning of the stud in the hub.

> Each Extended Stud weighs 34 grams. Compare to the factory wheel stud weight of 37 grams and ARP wheel studs of 68+ grams.

Extended wheel studs are available in sets of 10 and single piece set.

Single-piece wheel studs are available and are ideal for when replacing only a few old or damaged studs.

Before ordering

Match the full SKU, dimensions, thread or bore size, finish, vehicle application and pack quantity to the intended installation. Where an application is vehicle-specific, confirm model year, engine, transmission, body style and any stated exclusions. Universal does not mean suitable for every installation; available space, interfaces and supporting components still require checking.

Installation and use

Follow current manufacturer and vehicle service information. Performance, braking, suspension, fuel, steering and safety-related components should be installed and checked by a suitably experienced person. Confirm required companion parts, settings, clearances and local road-use requirements before installation.

Evidence record

Identity and supplier catalogue details were reconciled by exact part number BXAC-00180 against the supplied BLOX Racing 2026 price workbook and/or official Shopify-format supplier data file on 30 August 2026. UK VAT-inclusive retail, current stock, media rights, structured vehicle fitment and market-specific approval remain separate verification gates unless explicitly stated above.