Eibach 18mm Wheel Spacers 120x5 64mm CB M14x1.5 – S90-4-18-002

Eibach 18mm Wheel Spacers 120x5 64mm CB M14x1.5 – S90-4-18-002 is an Eibach Pro-Spacer wheel spacer with specifications confirmed against the exact EibachShop listing for part number S90-4-18-002.

Specifications

• SKU: S90-4-18-002
• Colour: Silver
• Size: 18mm
• System: 4
• Centre Bore: 64mm
• For What Thread: M14x1,5
• Fittings: Fittings included
• Spacer Stamping: 91418002

Supplier note: ATTENTION - ALSO NOTE ON SERIES WHEELS! - When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is not possible to use the wheels or wheelspacers! Please check as follows: Stud lengh (e.g. 25mm) minus spacer-thickness (e.g.15mm) = 10mm exess length. So the cut out should have 11mm depth to take the original stud. Further the cut out should have minimum 22mmx22mm height/width to take the overlaping nut. It´s allowed to shorten the stud bolt with a saw (Maximal up to the beginning of the nut. - We recommend only to shorten the minimum lengh.) If shorten the stud bolts, first please consider that all wheels used at the car still will fit (e.g. summer- / winterwheels) ATTENTION: when using 15 mm wheelspacers at least 7 mm deep cut-outs are needed (at 20mm wheelspacers at least 2mm deep cut-outs are needed) as the nuts stand over the contact surface! It´s allowed to shorten the stud bolts

Confirm wheel and vehicle compatibility before ordering. Follow Eibach's product instructions and the vehicle manufacturer's requirements for installation.