{"title":"Transfer Case \u0026 Haldex Components","description":"\u003cp\u003eTransfer-case, coupling, Haldex and four-wheel-drive control components.\u003c\/p\u003e","products":[{"product_id":"ravenol-awd-h-all-wheel-drive-haldex-fluid-1","title":"RAVENOL AWD-H All-Wheel Drive Haldex Fluid – 1211140-300-05-2CA1","description":"RAVENOL AWD-H Haldex Fluid is a special high-performance product engineered for use in Haldex's Allrad, Quattro and 4motion powertrains and is specially engineered for use with all-wheel drive powertrains with Haldex couplings, such as those in in Audi, Volkswagen, Seat, Skoda, Vauxhall, Land Rover and Volvo vehicles. The lower the dynamic viscosity, the better. The Haldex clutch will begin to work faster, the oil will circulate more quickly and there is no wear caused by a low temperature start. With regard to the parameters for dynamic viscosity at minus 40 °C, RAVENOL AWD-H Fluid delivers 270,63% higher performance than the original oil VW G 060 175 A2 ​​​​​​How the Hadlex Coupling operates: The Haldex Coupling is a very sophisticated piece of engineering and it needs to be looked after with regular Haldex oil changes. The axle closest to the engine is constantly powered. All-wheel drive powertrains with a Haldex coupling automatically direct engine power to the other axle where required, without any intervention from the driver. The Haldex coupling, a separate component to the rear final drive, but directly attached to it, is a submerged, multi-plate, wet clutch system that engages upon slip and transfers power to the rear final drive. The system is computer controlled with very fine engineering tolerances. If the Haldex oil is dirty, it can damage other components and affect performance. Dirty Haldex oil can overheat the coupling or cause the clutches to burn out. It can also burn out the Haldex Pump and will lead to loss of rear drive and eventual failure. You can learn more about the Haldex AWD system and how it works on our blog. Here is also a very interesting feature by one of our customers: Eco-Torque Ltd. So how does the RAVENOL Haldex Fluid compare? The test results are HERE. Application: RAVENOL AWD-H Haldex Fluid is suitable for use with all-wheel drive powertrains with Haldex couplings, such as those in Audi, Volkswagen, Seat, Skoda, Vauxhall\/ Opel, Land Rover and Volvo vehicles. The Haldex oil should be changed every 37,500 miles in order to avoid damage to the powertrain. Please be aware that as the opening on the coupling may be different sizes on different vehicles, you may need to trim the nozzle down in order to get a tight fit when using the 300ml size. Recommended: BMW 83222413513 GM 93165387 Land Rover LR 054941 (Haldex-Fluid from 2011-2014) Land Rover LR 003136 (Haldex-Fluid from 2011-2014) Opel 19 40 057 Volvo 31367940 VW G 052 175 A2 VW G 055 175 A2 VW G 060 175 A2 VW G 065 175 A2 ex Fluid offers: An excellent flow behaviour at low temperatures High, stable viscosity index Very good oxidation stability Reliable protection against wear, corrosion and foaming Excellent coefficient of friction constancy High thermal and oxidative stability Excellent cooling ability Improved shear stability\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e RAVENOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Oils \u0026amp; Fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalogue SKU:\u003c\/strong\u003e 1211140-300-05-2CA1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e check supplier availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTorque Monsta fitment confirmation:\u003c\/strong\u003e Check the manufacturer part number, vehicle model, generation, engine, power output, year range and factory options before ordering. Professional installation is recommended where specialist tools, calibration or safety-critical work are involved. Contact Torque Monsta before purchase if any fitment detail is unclear.\u003c\/p\u003e","brand":"RAVENOL","offers":[{"title":"Default Title","offer_id":58166632153413,"sku":"1211140-300-05-2CA1","price":15.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/1211140-300_AWD-H_3OOML.jpg?v=1780544263"},{"product_id":"ravenol-awd-h-all-wheel-drive-haldex-fluid-2","title":"RAVENOL AWD-H All-Wheel Drive Haldex Fluid – 1211140-001-01-2CA2","description":"RAVENOL AWD-H Haldex Fluid is a special high-performance product engineered for use in Haldex's Allrad, Quattro and 4motion powertrains and is specially engineered for use with all-wheel drive powertrains with Haldex couplings, such as those in in Audi, Volkswagen, Seat, Skoda, Vauxhall, Land Rover and Volvo vehicles. The lower the dynamic viscosity, the better. The Haldex clutch will begin to work faster, the oil will circulate more quickly and there is no wear caused by a low temperature start. With regard to the parameters for dynamic viscosity at minus 40 °C, RAVENOL AWD-H Fluid delivers 270,63% higher performance than the original oil VW G 060 175 A2 ​​​​​​How the Hadlex Coupling operates: The Haldex Coupling is a very sophisticated piece of engineering and it needs to be looked after with regular Haldex oil changes. The axle closest to the engine is constantly powered. All-wheel drive powertrains with a Haldex coupling automatically direct engine power to the other axle where required, without any intervention from the driver. The Haldex coupling, a separate component to the rear final drive, but directly attached to it, is a submerged, multi-plate, wet clutch system that engages upon slip and transfers power to the rear final drive. The system is computer controlled with very fine engineering tolerances. If the Haldex oil is dirty, it can damage other components and affect performance. Dirty Haldex oil can overheat the coupling or cause the clutches to burn out. It can also burn out the Haldex Pump and will lead to loss of rear drive and eventual failure. You can learn more about the Haldex AWD system and how it works on our blog. Here is also a very interesting feature by one of our customers: Eco-Torque Ltd. So how does the RAVENOL Haldex Fluid compare? The test results are HERE. Application: RAVENOL AWD-H Haldex Fluid is suitable for use with all-wheel drive powertrains with Haldex couplings, such as those in Audi, Volkswagen, Seat, Skoda, Vauxhall\/ Opel, Land Rover and Volvo vehicles. The Haldex oil should be changed every 37,500 miles in order to avoid damage to the powertrain. Please be aware that as the opening on the coupling may be different sizes on different vehicles, you may need to trim the nozzle down in order to get a tight fit when using the 300ml size. Recommended: BMW 83222413513 GM 93165387 Land Rover LR 054941 (Haldex-Fluid from 2011-2014) Land Rover LR 003136 (Haldex-Fluid from 2011-2014) Opel 19 40 057 Volvo 31367940 VW G 052 175 A2 VW G 055 175 A2 VW G 060 175 A2 VW G 065 175 A2 ex Fluid offers: An excellent flow behaviour at low temperatures High, stable viscosity index Very good oxidation stability Reliable protection against wear, corrosion and foaming Excellent coefficient of friction constancy High thermal and oxidative stability Excellent cooling ability Improved shear stability\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e RAVENOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Oils \u0026amp; Fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalogue SKU:\u003c\/strong\u003e 1211140-001-01-2CA2\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e check supplier availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTorque Monsta fitment confirmation:\u003c\/strong\u003e Check the manufacturer part number, vehicle model, generation, engine, power output, year range and factory options before ordering. Professional installation is recommended where specialist tools, calibration or safety-critical work are involved. Contact Torque Monsta before purchase if any fitment detail is unclear.\u003c\/p\u003e","brand":"RAVENOL","offers":[{"title":"Default Title","offer_id":58166632186181,"sku":"1211140-001-01-2CA2","price":30.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/1211140-001_AWD-H_1L.jpg?v=1780544264"},{"product_id":"ravenol-transfer-case-fluid-tf-0870-1","title":"RAVENOL Transfer Case Fluid TF-0870 – 1211128-001-01-2CB3","description":"\u003cp\u003eRAVENOL Transfer Case Fluid TF-0870 – Part 1211128-001-01-2CB3.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e RAVENOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 1211128-001-01-2CB3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Oils \u0026amp; Fluids\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e check supplier availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTorque Monsta fitment confirmation:\u003c\/strong\u003e Check the manufacturer part number, vehicle model, generation, engine, power output, year range and factory options before ordering. Professional installation is recommended where specialist tools, calibration or safety-critical work are involved. Contact Torque Monsta before purchase if any fitment detail is unclear.\u003c\/p\u003e","brand":"RAVENOL","offers":[{"title":"Default Title","offer_id":58166650995013,"sku":"1211128-001-01-2CB3","price":19.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/1211128-001_DTF-1_1L.jpg?v=1780544558"},{"product_id":"ravenol-transfer-case-fluid-tf-0870-2","title":"RAVENOL Transfer Case Fluid TF-0870 – 1211128-004-01-2CB5","description":"\u003cp\u003eRAVENOL Transfer Case Fluid TF-0870 – Part 1211128-004-01-2CB5.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e RAVENOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 1211128-004-01-2CB5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Oils \u0026amp; Fluids\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e check supplier availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTorque Monsta fitment confirmation:\u003c\/strong\u003e Check the manufacturer part number, vehicle model, generation, engine, power output, year range and factory options before ordering. Professional installation is recommended where specialist tools, calibration or safety-critical work are involved. Contact Torque Monsta before purchase if any fitment detail is unclear.\u003c\/p\u003e","brand":"RAVENOL","offers":[{"title":"Default Title","offer_id":58166651027781,"sku":"1211128-004-01-2CB5","price":74.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/1211128-004_DTF-1_4L.jpg?v=1780544559"},{"product_id":"ravenol-transfer-case-fluid-tf-0870-3","title":"RAVENOL Transfer Case Fluid TF-0870 – 1211128-020-01-999","description":"\u003cp\u003eRAVENOL Transfer Case Fluid TF-0870 – Part 1211128-020-01-999.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e RAVENOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 1211128-020-01-999\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Oils \u0026amp; Fluids\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e check supplier availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTorque Monsta fitment confirmation:\u003c\/strong\u003e Check the manufacturer part number, vehicle model, generation, engine, power output, year range and factory options before ordering. Professional installation is recommended where specialist tools, calibration or safety-critical work are involved. Contact Torque Monsta before purchase if any fitment detail is unclear.\u003c\/p\u003e","brand":"RAVENOL","offers":[{"title":"Default Title","offer_id":58166651224389,"sku":"1211128-020-01-999","price":356.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/1211128-020.jpg?v=1780544560"},{"product_id":"mk4-r32-audi-tt-haldex-oil-filter-wrench","title":"CTS Turbo MK4 R32\/Audi TT Haldex Oil Filter Wrench – CTS-HW-045","description":"\u003cspan class=\"generalContent\"\u003eIf you have ever tried to change the oil in your MK4 R32 or MK1 Audi TT rear differential without this tool, you will know it is practically impossible. We designed this tool for you, to make that process a breeze.\u003c\/span\u003e\nSimply put this tool on a 3\/8\" drive ratchet, and the filter will come right off. Compatible with Gen1 Haldex systems only.\n\u003cb\u003eThis is a MUST HAVE for all MK4 R32 and MK1 TT owners!\u003c\/b\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e\n\u003ctable class=\"appTable\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"make\"\u003eAudi\u003c\/td\u003e\n\u003ctd class=\"model\"\u003eTT MKI\u003c\/td\u003e\n\u003ctd class=\"submodel\"\u003eQuattro\u003c\/td\u003e\n\u003ctd class=\"engine\"\u003e180HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"make\"\u003eAudi\u003c\/td\u003e\n\u003ctd class=\"model\"\u003eTT MKI\u003c\/td\u003e\n\u003ctd class=\"submodel\"\u003eQuattro\u003c\/td\u003e\n\u003ctd class=\"engine\"\u003e225HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"make\"\u003eAudi\u003c\/td\u003e\n\u003ctd class=\"model\"\u003eTT MKI\u003c\/td\u003e\n\u003ctd class=\"submodel\"\u003eQuattro\u003c\/td\u003e\n\u003ctd class=\"engine\"\u003e3.2L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"make\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd class=\"model\"\u003eR32 MKIV\u003c\/td\u003e\n\u003ctd class=\"submodel\"\u003eAll\u003c\/td\u003e\n\u003ctd class=\"engine\"\u003e3.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CTS Turbo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Tools\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalogue SKU:\u003c\/strong\u003e CTS-HW-045\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e check supplier availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTorque Monsta fitment confirmation:\u003c\/strong\u003e Check the manufacturer part number, vehicle model, generation, engine, power output, year range and factory options before ordering. Professional installation is recommended where specialist tools, calibration or safety-critical work are involved. Contact Torque Monsta before purchase if any fitment detail is unclear.\u003c\/p\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":58177896907077,"sku":"CTS-HW-045","price":28.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/haldex-wrench-1.jpg?v=1780638690"},{"product_id":"drain-plug-kit-mag-mk5-6","title":"034 Motorsport Drain Plug Kit, Mag, Mk5 – Part 034-110-2000","description":"\u003cp\u003e034 Motorsport Drain Plug Kit, Mag, Mk5 – Part 034-110-2000.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e 034 Motorsport\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 034-110-2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Engine Components\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e check supplier availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTorque Monsta fitment confirmation:\u003c\/strong\u003e Check the manufacturer part number, vehicle model, generation, engine, power output, year range and factory options before ordering. Professional installation is recommended where specialist tools, calibration or safety-critical work are involved. Contact Torque Monsta before purchase if any fitment detail is unclear.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":58286769996101,"sku":"034-110-2000","price":20.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/VR6AdaptorPlate_111c416f-6d54-41d4-8faf-6faf4f56ac8e.webp?v=1786330230"},{"product_id":"haldex-plug-kit-mag-mqb-dsg","title":"Haldex Plug Kit, Mag, MQB DSG","description":"\u003cp\u003e\u003cstrong\u003eHaldex Plug Kit, Mag, MQB DSG\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis 034Motorsport product is supplied under manufacturer part number \u003cstrong\u003e034-504-Z019\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e check supplier availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTorque Monsta fitment confirmation:\u003c\/strong\u003e Check the manufacturer part number, vehicle model, generation, engine, power output, year range and factory options before ordering. Professional installation is recommended where specialist tools, calibration or safety-critical work are involved. Contact Torque Monsta before purchase if any fitment detail is unclear.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":58286830453061,"sku":"034-504-Z019","price":33.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/034-509-4050-SD__24270.1659165545_2cbff5c6-890c-418c-9e19-2ad72db7683a.png?v=1786330247"},{"product_id":"transfer-case-mount-transmission-1-febi-bilstein","title":"Febi Bilstein Transfer Case Mount Transmission – FEBI-08743","description":"\u003cp\u003e\u003cstrong\u003eFebi Bilstein Transfer Case Mount Transmission – FEBI-08743\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003eFEBI-08743\u003c\/strong\u003e. This record has been reconciled to the current supplier catalogue and the matching official bilstein group partsfinder entry.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febi Bilstein\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e FEBI-08743\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed country of origin:\u003c\/strong\u003e IN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommodity code:\u003c\/strong\u003e 40169957\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Vehicle-specific compatibility can depend on build date, engine, transmission, chassis or fitted options. If any detail is uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values and included components are stated only where they are supplied by the manufacturer; none are inferred here.\u003c\/p\u003e","brand":"Febi","offers":[{"title":"Default Title","offer_id":58593568162117,"sku":"FEBI-08743","price":2.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/08743_1.jpg?v=1786387956"},{"product_id":"transfer-case-mount-steering-suspension-1-febi-bilstein","title":"Febi Bilstein Transfer Case Mount Steering \u0026 Suspension – FEBI-39162","description":"\u003cp\u003e\u003cstrong\u003eFebi Bilstein Transfer Case Mount Steering \u0026amp; Suspension – FEBI-39162\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003eFEBI-39162\u003c\/strong\u003e. This record has been reconciled to the current supplier catalogue and the matching official bilstein group partsfinder entry.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febi Bilstein\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e FEBI-39162\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed country of origin:\u003c\/strong\u003e KR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommodity code:\u003c\/strong\u003e 40169952\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Vehicle-specific compatibility can depend on build date, engine, transmission, chassis or fitted options. If any detail is uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values and included components are stated only where they are supplied by the manufacturer; none are inferred here.\u003c\/p\u003e","brand":"Febi","offers":[{"title":"Default Title","offer_id":58598468813125,"sku":"FEBI-39162","price":38.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/39162_1.jpg?v=1786391321"},{"product_id":"transfer-case-mount-steering-suspension-2-febi-bilstein","title":"Febi Bilstein Transfer Case Mount Steering \u0026 Suspension – FEBI-39163","description":"\u003cp\u003e\u003cstrong\u003eFebi Bilstein Transfer Case Mount Steering \u0026amp; Suspension – FEBI-39163\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003eFEBI-39163\u003c\/strong\u003e. This record has been reconciled to the current supplier catalogue and the matching official bilstein group partsfinder entry.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febi Bilstein\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e FEBI-39163\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed country of origin:\u003c\/strong\u003e KR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommodity code:\u003c\/strong\u003e 40169952\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Vehicle-specific compatibility can depend on build date, engine, transmission, chassis or fitted options. If any detail is uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values and included components are stated only where they are supplied by the manufacturer; none are inferred here.\u003c\/p\u003e","brand":"Febi","offers":[{"title":"Default Title","offer_id":58598469173573,"sku":"FEBI-39163","price":38.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/39163_1.jpg?v=1786391322"},{"product_id":"transfer-case-mount-transmission-2-febi-bilstein","title":"Febi Bilstein Transfer Case Mount Transmission – FEBI-40797","description":"\u003cp\u003e\u003cstrong\u003eFebi Bilstein Transfer Case Mount Transmission – FEBI-40797\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003eFEBI-40797\u003c\/strong\u003e. This record has been reconciled to the current supplier catalogue and the matching official bilstein group partsfinder entry.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febi Bilstein\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e FEBI-40797\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed country of origin:\u003c\/strong\u003e ES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommodity code:\u003c\/strong\u003e 40169957\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Vehicle-specific compatibility can depend on build date, engine, transmission, chassis or fitted options. If any detail is uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values and included components are stated only where they are supplied by the manufacturer; none are inferred here.\u003c\/p\u003e","brand":"Febi","offers":[{"title":"Default Title","offer_id":58599312130373,"sku":"FEBI-40797","price":14.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/40797_1.jpg?v=1786391570"},{"product_id":"high-performance-haldex-coupling-oil-850ml-febi-bilstein","title":"Febi Bilstein High-Performance Haldex Coupling Oil 850ml – FEBI-101172","description":"\u003cp\u003e\u003cstrong\u003eFebi Bilstein High-Performance Haldex Coupling Oil 850ml – FEBI-101172\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003eFEBI-101172\u003c\/strong\u003e. This record has been reconciled to the current supplier catalogue and the matching official bilstein group partsfinder entry.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febi Bilstein\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e FEBI-101172\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed country of origin:\u003c\/strong\u003e DE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommodity code:\u003c\/strong\u003e 27101987\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Vehicle-specific compatibility can depend on build date, engine, transmission, chassis or fitted options. If any detail is uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values and included components are stated only where they are supplied by the manufacturer; none are inferred here.\u003c\/p\u003e","brand":"Febi","offers":[{"title":"Default Title","offer_id":58602100326725,"sku":"FEBI-101172","price":17.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/101172_1.jpg?v=1786392902"},{"product_id":"transfer-case-mount-1-febi-bilstein","title":"Febi Bilstein Transfer Case Mount – FEBI-103184","description":"\u003cp\u003e\u003cstrong\u003eFebi Bilstein Transfer Case Mount – FEBI-103184\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003eFEBI-103184\u003c\/strong\u003e. This record has been reconciled to the current supplier catalogue and the matching official bilstein group partsfinder entry.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febi Bilstein\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e FEBI-103184\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed country of origin:\u003c\/strong\u003e SK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommodity code:\u003c\/strong\u003e 40169952\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Vehicle-specific compatibility can depend on build date, engine, transmission, chassis or fitted options. If any detail is uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values and included components are stated only where they are supplied by the manufacturer; none are inferred here.\u003c\/p\u003e","brand":"Febi","offers":[{"title":"Default Title","offer_id":58602417455429,"sku":"FEBI-103184","price":25.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/103184_1.jpg?v=1786393170"},{"product_id":"assortment-case-febi-bilstein","title":"Febi Bilstein Assortment Case – FEBI-105664","description":"\u003cp\u003e\u003cstrong\u003eFebi Bilstein Assortment Case – FEBI-105664\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003eFEBI-105664\u003c\/strong\u003e. This record has been reconciled to the current supplier catalogue and the matching official bilstein group partsfinder entry.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febi Bilstein\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e FEBI-105664\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed country of origin:\u003c\/strong\u003e NO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommodity code:\u003c\/strong\u003e 39174000\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Vehicle-specific compatibility can depend on build date, engine, transmission, chassis or fitted options. If any detail is uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values and included components are stated only where they are supplied by the manufacturer; none are inferred here.\u003c\/p\u003e","brand":"Febi","offers":[{"title":"Default Title","offer_id":58602667802949,"sku":"FEBI-105664","price":423.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/105664_1.jpg?v=1786393487"},{"product_id":"transfer-case-fluid-febi-bilstein","title":"Febi Bilstein Transfer Case Fluid – FEBI-170367","description":"\u003cp\u003e\u003cstrong\u003eFebi Bilstein Transfer Case Fluid – FEBI-170367\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003eFEBI-170367\u003c\/strong\u003e. This record has been reconciled to the current supplier catalogue and the matching official bilstein group partsfinder entry.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febi Bilstein\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e FEBI-170367\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed country of origin:\u003c\/strong\u003e DE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommodity code:\u003c\/strong\u003e 27101987\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Vehicle-specific compatibility can depend on build date, engine, transmission, chassis or fitted options. If any detail is uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values and included components are stated only where they are supplied by the manufacturer; none are inferred here.\u003c\/p\u003e","brand":"Febi","offers":[{"title":"Default Title","offer_id":58603265720645,"sku":"FEBI-170367","price":25.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/170367_1.jpg?v=1786394165"},{"product_id":"transfer-case-mount-2-febi-bilstein","title":"Febi Bilstein Transfer Case Mount – FEBI-8743","description":"\u003cp\u003e\u003cstrong\u003eFebi Bilstein Transfer Case Mount – FEBI-8743\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003eFEBI-8743\u003c\/strong\u003e. This record has been reconciled to the current supplier catalogue and the matching official bilstein group partsfinder entry.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febi Bilstein\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e FEBI-8743\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed country of origin:\u003c\/strong\u003e IN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommodity code:\u003c\/strong\u003e 40169957\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Vehicle-specific compatibility can depend on build date, engine, transmission, chassis or fitted options. If any detail is uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values and included components are stated only where they are supplied by the manufacturer; none are inferred here.\u003c\/p\u003e","brand":"Febi","offers":[{"title":"Default Title","offer_id":58605719028037,"sku":"FEBI-8743","price":2.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/01010_1_a1500103-f130-416c-bc59-97dfcaf2b3dd.jpg?v=1787309326"},{"product_id":"repair-kit-rear-axle-drive-for-differential-haldex-febi-bilstein","title":"Febi Bilstein Repair Kit Rear axle drive for Differential \u0026 Haldex – FEBI-1000000","description":"\u003cp\u003e\u003cstrong\u003eFebi Bilstein Repair Kit Rear axle drive for Differential \u0026amp; Haldex – FEBI-1000000\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003eFEBI-1000000\u003c\/strong\u003e. This record has been reconciled to the current supplier catalogue and the matching official bilstein group partsfinder entry.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febi Bilstein\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e FEBI-1000000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed country of origin:\u003c\/strong\u003e DE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommodity code:\u003c\/strong\u003e 27101987\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Vehicle-specific compatibility can depend on build date, engine, transmission, chassis or fitted options. If any detail is uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values and included components are stated only where they are supplied by the manufacturer; none are inferred here.\u003c\/p\u003e","brand":"Febi","offers":[{"title":"Default Title","offer_id":58605801996613,"sku":"FEBI-1000000","price":272.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/1000000_1_b526436d-70f3-4159-b384-a24dce7d9505.jpg?v=1786397897"},{"product_id":"hydraulic-filter-for-haldex-coupling-with-cap-and-bolts-febi-bilstein","title":"Febi Bilstein Hydraulic Filter for Haldex coupling, with cap and bolts – 177922","description":"\u003cp\u003e\u003cstrong\u003eFebi Bilstein Hydraulic Filter for Haldex coupling, with cap and bolts – 177922\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003e177922\u003c\/strong\u003e. This record has been reconciled to the current supplier catalogue and the matching official bilstein group partsfinder entry.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febi Bilstein\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 177922\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed country of origin:\u003c\/strong\u003e CN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommodity code:\u003c\/strong\u003e 84212980\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Vehicle-specific compatibility can depend on build date, engine, transmission, chassis or fitted options. If any detail is uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values and included components are stated only where they are supplied by the manufacturer; none are inferred here.\u003c\/p\u003e","brand":"Febi","offers":[{"title":"Default Title","offer_id":58605802291525,"sku":"177922","price":34.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/177922_1_9d7047a5-637f-42fa-be7b-3957158be154.jpg?v=1786397897"},{"product_id":"racingline-racingline-magnetic-haldex-plug-kit","title":"RacingLine Magnetic Haldex Plug Kit – VWR180002","description":"\u003cp\u003e\u003cstrong\u003eRacingLine Magnetic Haldex Plug Kit – VWR180002\u003c\/strong\u003e is identified by exact RacingLine part number \u003cstrong\u003eVWR180002\u003c\/strong\u003e. The product identity and description below were matched to the corresponding current supplier or manufacturer catalogue record.\u003c\/p\u003e\u003ch2\u003eProduct details\u003c\/h2\u003e\u003cp\u003eRacingLine Magnetic Haldex Plug Kit\u003c\/p\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and complete vehicle application before ordering. Compatibility can depend on build date, engine, transmission, chassis, emissions equipment or fitted options. If uncertain, contact Torque Monsta with the registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific contents, settings, torque values, certification and road-use claims are stated only where supported by exact matching evidence.\u003c\/p\u003e","brand":"RacingLine","offers":[{"title":"Default Title","offer_id":58657088602437,"sku":"VWR180002","price":27.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/RL-VWR13G700RFK_3_4dd56dc1-f1ff-4ab6-b1c3-82e95ab36999.jpg?v=1786401137"},{"product_id":"schwaben-haldex-gen-1-oil-filter-wrench-schwaben","title":"Schwaben Haldex Gen 1 Oil Filter Wrench","description":"\u003cp\u003e\u003cstrong\u003eSchwaben Haldex Gen 1 Oil Filter Wrench\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsed to remove Haldex oil filter housing on the generation 1 haldex rear differential\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Schwaben Haldex oil filter housing removal tool has a specially configured head, a must-have item when servicing Audi TT or VW R32 all-wheel-drive systems. This tool is part of the ECS Tuning Haldex service kit for Audi TT MKI Quattro\/ Audi S3 1.8T \/ Vw Golf Mk4 R32.\u003c\/p\u003e \u003cp\u003e- Made of high quality durable steel\u003cbr\u003e- Angled head gets the job done\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: ES3661\u003c\/li\u003e\n\u003cli\u003eVehicle fitment: Volkswagen, Audi | Golf Mk4, S3 (8L 99-03), TT Mk1 (8N) | Differentials, Tools, 1.9 TDI, V5, V6, GTI 1.8T, R32, 1.8T 20V, 3.2 V6 | Mk4, 8L, 8N, Mk1\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e check supplier availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTorque Monsta fitment confirmation:\u003c\/strong\u003e Check the manufacturer part number, vehicle model, generation, engine, power output, year range and factory options before ordering. Professional installation is recommended where specialist tools, calibration or safety-critical work are involved. Contact Torque Monsta before purchase if any fitment detail is unclear.\u003c\/p\u003e","brand":"Schwaben","offers":[{"title":"Default Title","offer_id":58829957202245,"sku":"ES3661","price":41.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/188481_x600__13199.1449610162.jpg?v=1786424843"},{"product_id":"febest-transfer-case-flange","title":"Febest Transfer case flange – 0282F-D40PS","description":"\u003cp\u003e\u003cstrong\u003eFebest Transfer case flange – 0282F-D40PS\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003e0282F-D40PS\u003c\/strong\u003e. This record has been reconciled to the current UK supplier catalogue row. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febest\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 0282F-D40PS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 4056111148656\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed country of origin:\u003c\/strong\u003e CN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommodity code:\u003c\/strong\u003e 87085099\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Febest","offers":[{"title":"Default Title","offer_id":58831297675589,"sku":"0282F-D40PS","price":31.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/0282F-D40PS_732c906d-25db-48da-99b4-89ef91d977d7.jpg?v=1787306621"},{"product_id":"febest-transfer-case-flange-febest","title":"Febest Transfer case flange","description":"\u003cp\u003eFebest Transfer case flange is a Febest replacement component supplied as a SKU-specific listing for Torque Monsta Automotive.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSKU \/ part number: 0282F-D40PS\u003c\/li\u003e\n\u003cli\u003eEAN: 4056111148656\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e check supplier availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTorque Monsta fitment confirmation:\u003c\/strong\u003e Check the manufacturer part number, vehicle model, generation, engine, power output, year range and factory options before ordering. Professional installation is recommended where specialist tools, calibration or safety-critical work are involved. Contact Torque Monsta before purchase if any fitment detail is unclear.\u003c\/p\u003e","brand":"Febest","offers":[{"title":"Default Title","offer_id":58832481517893,"sku":"TM-SKU-BD1073407A2A","price":31.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/0282F-D40PS_4d1c18cd-92f3-4ea5-8d73-a9baa4e12c50.jpg?v=1787306977"},{"product_id":"febest-transfer-case-flange-0282f-d40ps","title":"Febest Transfer case flange - Part 0282F-D40PS","description":"\u003cp\u003eFebest Transfer case flange - Part 0282F-D40PS. This product is identified by manufacturer part number 0282F-D40PS.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Febest\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Drivetrain Components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 0282F-D40PS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 4056111148656\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e CN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit weight:\u003c\/strong\u003e 0.8620 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier dimensions:\u003c\/strong\u003e Depth 102, Width 102, Height 67\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease confirm the manufacturer part number, vehicle model, generation, engine, production year and factory options before ordering. Professional installation is recommended where specialist tools, calibration or safety-critical work are involved.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e check supplier availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTorque Monsta fitment confirmation:\u003c\/strong\u003e Check the manufacturer part number, vehicle model, generation, engine, power output, year range and factory options before ordering. Professional installation is recommended where specialist tools, calibration or safety-critical work are involved. Contact Torque Monsta before purchase if any fitment detail is unclear.\u003c\/p\u003e","brand":"Febest","offers":[{"title":"Default Title","offer_id":58834332647749,"sku":"TM-SKU-D4CFF4EFB351","price":33.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/0282F-D40PS.jpg?v=1786455751"},{"product_id":"powerflex-pff5-4628-transfer-case-bush-insert-standard-bmw-3-series-e46-1999-2006-e46-xi-xd-4wd-road-series-powerflex","title":"Powerflex PFF5-4628 - Transfer Case Bush Insert (Standard) - BMW 3 Series E46 (1999 - 2006) | E46 Xi\/XD (4wd) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628 - Transfer Case Bush Insert (Standard) - BMW 3 Series E46 (1999 - 2006) | E46 Xi\/XD (4wd) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628 Transmission Case Bush Insert (Standard) is made from our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance on standard Petrol\/Diesel vehicles whilst limiting NVH transmission into the cabin. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676563989\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58842884211013,"sku":"PFF5-4628-81CF58B8","price":28.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628.jpg?v=1786517237"},{"product_id":"powerflex-pff5-4628blk-transfer-case-bush-insert-motorsport-bmw-3-series-e46-1999-2006-e46-xi-xd-4wd-black-series-powerflex","title":"Powerflex PFF5-4628BLK - Transfer Case Bush Insert (Motorsport) - BMW 3 Series E46 (1999 - 2006) | E46 Xi\/XD (4wd) - Black Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628BLK - Transfer Case Bush Insert (Motorsport) - BMW 3 Series E46 (1999 - 2006) | E46 Xi\/XD (4wd) - Black Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628BLK\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Motorsport)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628BLK Transmission Case Bush Insert (Motorsport) is made from our stiffest 95A Black Series material for Motorsport use, providing a no-compromise performance option for track-focused builds. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676564009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628BLK.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58842884538693,"sku":"PFF5-4628BLK-9E9FCBD8","price":31.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628BLK.jpg?v=1786517238"},{"product_id":"powerflex-pff5-4628p-transfer-case-bush-insert-tuned-track-bmw-3-series-e46-1999-2006-e46-xi-xd-4wd-road-series-powerflex","title":"Powerflex PFF5-4628P - Transfer Case Bush Insert (Tuned\/Track) - BMW 3 Series E46 (1999 - 2006) | E46 Xi\/XD (4wd) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628P - Transfer Case Bush Insert (Tuned\/Track) - BMW 3 Series E46 (1999 - 2006) | E46 Xi\/XD (4wd) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628P\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Tuned\/Track)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628P Transmission Case Bush Insert (Tuned\/Track) is made from our signature Purple 80A material to restrict movement further for Tuned Petrol\/Tuned Diesel vehicles and occasional track use. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676563996\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628P.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58842884768069,"sku":"PFF5-4628P-CBD3E77E","price":28.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628P.jpg?v=1786517239"},{"product_id":"powerflex-pff5-1526-transfer-case-bush-insert-petrol-bmw-3-series-e90-e91-e92-e93-2005-2013-e9-xdrive-road-series-powerflex","title":"Powerflex PFF5-1526 - Transfer Case Bush Insert (Petrol) - BMW 3 Series E90, E91, E92 \u0026 E93 (2005-2013) | E9* xDrive - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-1526 - Transfer Case Bush Insert (Petrol) - BMW 3 Series E90, E91, E92 \u0026amp; E93 (2005-2013) | E9* xDrive - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-1526\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-1526\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Petrol)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-1526 Transfer Case Bush Insert (Standard) is made from our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance on standard Petrol\/Diesel vehicles whilst limiting NVH transmission into the cabin. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 138\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676565747\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58842940768581,"sku":"PFF5-1526-754EB29D","price":26.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-1526.jpg?v=1786517430"},{"product_id":"powerflex-pff5-1526p-transfer-case-bush-insert-tuned-track-bmw-3-series-e90-e91-e92-e93-2005-2013-e9-xdrive-road-series-powerflex","title":"Powerflex PFF5-1526P - Transfer Case Bush Insert (Tuned\/Track) - BMW 3 Series E90, E91, E92 \u0026 E93 (2005-2013) | E9* xDrive - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-1526P - Transfer Case Bush Insert (Tuned\/Track) - BMW 3 Series E90, E91, E92 \u0026amp; E93 (2005-2013) | E9* xDrive - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-1526P\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-1526P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Tuned\/Track)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-1526P Transfer Case Bush Insert (Tuned\/Track) is made from our signature Purple 80A material to restrict movement further for Tuned Petrol\/Tuned Diesel vehicles and occasional track use. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 138\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676565754\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58842941063493,"sku":"PFF5-1526P-D76BEBD0","price":26.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-1526P.jpg?v=1786517433"},{"product_id":"powerflex-pff5-1526r-transfer-case-bush-insert-diesel-bmw-3-series-e90-e91-e92-e93-2005-2013-e9-xdrive-road-series-powerflex","title":"Powerflex PFF5-1526R - Transfer Case Bush Insert (Diesel) - BMW 3 Series E90, E91, E92 \u0026 E93 (2005-2013) | E9* xDrive - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-1526R - Transfer Case Bush Insert (Diesel) - BMW 3 Series E90, E91, E92 \u0026amp; E93 (2005-2013) | E9* xDrive - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-1526R\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-1526R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Diesel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-1526R Transfer Case Bush Insert (Diesel) is made from our Red 65A durometer material, providing an excellent balance of strength and compliance for improved performance on standard Diesel vehicles whilst limiting NVH transmission into the cabin. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 138\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676565761\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58842941358405,"sku":"PFF5-1526R-F442EA79","price":26.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-1526R.jpg?v=1786517433"},{"product_id":"powerflex-pff5-4628-transfer-case-bush-insert-standard-bmw-3-series-e90-e91-e92-e93-2005-2013-e9-xdrive-road-series-powerflex","title":"Powerflex PFF5-4628 - Transfer Case Bush Insert (Standard) - BMW 3 Series E90, E91, E92 \u0026 E93 (2005-2013) | E9* xDrive - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628 - Transfer Case Bush Insert (Standard) - BMW 3 Series E90, E91, E92 \u0026amp; E93 (2005-2013) | E9* xDrive - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628 Transmission Case Bush Insert (Standard) is made from our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance on standard Petrol\/Diesel vehicles whilst limiting NVH transmission into the cabin. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676563989\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58842942734661,"sku":"PFF5-4628-735983D4","price":28.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628_aa978a14-6af4-4ac2-b268-2c7c1a53f8ca.jpg?v=1786517439"},{"product_id":"powerflex-pff5-4628blk-transfer-case-bush-insert-motorsport-bmw-3-series-e90-e91-e92-e93-2005-2013-e9-xdrive-black-series-powerflex","title":"Powerflex PFF5-4628BLK - Transfer Case Bush Insert (Motorsport) - BMW 3 Series E90, E91, E92 \u0026 E93 (2005-2013) | E9* xDrive - Black Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628BLK - Transfer Case Bush Insert (Motorsport) - BMW 3 Series E90, E91, E92 \u0026amp; E93 (2005-2013) | E9* xDrive - Black Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628BLK\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Motorsport)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628BLK Transmission Case Bush Insert (Motorsport) is made from our stiffest 95A Black Series material for Motorsport use, providing a no-compromise performance option for track-focused builds. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676564009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628BLK.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58842942964037,"sku":"PFF5-4628BLK-D06ACEF6","price":31.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628BLK_f22518d0-55b7-4f5f-938a-c0becf321b2e.jpg?v=1786517440"},{"product_id":"powerflex-pff5-4628p-transfer-case-bush-insert-tuned-track-bmw-3-series-e90-e91-e92-e93-2005-2013-e9-xdrive-road-series-powerflex","title":"Powerflex PFF5-4628P - Transfer Case Bush Insert (Tuned\/Track) - BMW 3 Series E90, E91, E92 \u0026 E93 (2005-2013) | E9* xDrive - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628P - Transfer Case Bush Insert (Tuned\/Track) - BMW 3 Series E90, E91, E92 \u0026amp; E93 (2005-2013) | E9* xDrive - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628P\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Tuned\/Track)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628P Transmission Case Bush Insert (Tuned\/Track) is made from our signature Purple 80A material to restrict movement further for Tuned Petrol\/Tuned Diesel vehicles and occasional track use. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676563996\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628P.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58842943258949,"sku":"PFF5-4628P-6652C5C4","price":28.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628P_16812ee3-a341-4a72-8026-155554c7986b.jpg?v=1786517441"},{"product_id":"powerflex-pff5-4628-transfer-case-bush-insert-standard-bmw-5-series-e60-e61-2003-2010-e60-e61-xdrive-road-series-powerflex","title":"Powerflex PFF5-4628 - Transfer Case Bush Insert (Standard) - BMW 5 Series E60, E61 (2003-2010) | E60\/E61 xDrive - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628 - Transfer Case Bush Insert (Standard) - BMW 5 Series E60, E61 (2003-2010) | E60\/E61 xDrive - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628 Transmission Case Bush Insert (Standard) is made from our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance on standard Petrol\/Diesel vehicles whilst limiting NVH transmission into the cabin. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676563989\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843222802757,"sku":"PFF5-4628-052FE531","price":28.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628_6d57d1eb-1105-4e01-bee1-942f9b8a1790.jpg?v=1786518684"},{"product_id":"powerflex-pff5-4628blk-transfer-case-bush-insert-motorsport-bmw-5-series-e60-e61-2003-2010-e60-e61-xdrive-black-series-powerflex","title":"Powerflex PFF5-4628BLK - Transfer Case Bush Insert (Motorsport) - BMW 5 Series E60, E61 (2003-2010) | E60\/E61 xDrive - Black Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628BLK - Transfer Case Bush Insert (Motorsport) - BMW 5 Series E60, E61 (2003-2010) | E60\/E61 xDrive - Black Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628BLK\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Motorsport)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628BLK Transmission Case Bush Insert (Motorsport) is made from our stiffest 95A Black Series material for Motorsport use, providing a no-compromise performance option for track-focused builds. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676564009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628BLK.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843222835525,"sku":"PFF5-4628BLK-F6F75889","price":31.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628BLK_354593d4-a9d0-4911-aebd-45648deb248c.jpg?v=1786518685"},{"product_id":"powerflex-pff5-4628p-transfer-case-bush-insert-tuned-track-bmw-5-series-e60-e61-2003-2010-e60-e61-xdrive-road-series-powerflex","title":"Powerflex PFF5-4628P - Transfer Case Bush Insert (Tuned\/Track) - BMW 5 Series E60, E61 (2003-2010) | E60\/E61 xDrive - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628P - Transfer Case Bush Insert (Tuned\/Track) - BMW 5 Series E60, E61 (2003-2010) | E60\/E61 xDrive - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628P\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Tuned\/Track)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628P Transmission Case Bush Insert (Tuned\/Track) is made from our signature Purple 80A material to restrict movement further for Tuned Petrol\/Tuned Diesel vehicles and occasional track use. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676563996\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628P.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843222868293,"sku":"PFF5-4628P-A73FFE2C","price":28.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628P_368ad864-6286-4318-800f-102bcce59a6b.jpg?v=1786518686"},{"product_id":"powerflex-pff5-4628-transfer-case-bush-insert-standard-bmw-5-series-f07-gt-2009-2016-road-series-powerflex","title":"Powerflex PFF5-4628 - Transfer Case Bush Insert (Standard) - BMW 5 Series F07 GT (2009 - 2016) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628 - Transfer Case Bush Insert (Standard) - BMW 5 Series F07 GT (2009 - 2016) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628 Transmission Case Bush Insert (Standard) is made from our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance on standard Petrol\/Diesel vehicles whilst limiting NVH transmission into the cabin. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676563989\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843246887237,"sku":"PFF5-4628-C2BB75A3","price":28.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628_02b74f8e-4558-4313-9e56-465df80adf1f.jpg?v=1786518798"},{"product_id":"powerflex-pff5-4628blk-transfer-case-bush-insert-motorsport-bmw-5-series-f07-gt-2009-2016-black-series-powerflex","title":"Powerflex PFF5-4628BLK - Transfer Case Bush Insert (Motorsport) - BMW 5 Series F07 GT (2009 - 2016) - Black Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628BLK - Transfer Case Bush Insert (Motorsport) - BMW 5 Series F07 GT (2009 - 2016) - Black Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628BLK\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Motorsport)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628BLK Transmission Case Bush Insert (Motorsport) is made from our stiffest 95A Black Series material for Motorsport use, providing a no-compromise performance option for track-focused builds. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676564009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628BLK.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843246920005,"sku":"PFF5-4628BLK-54B98E1A","price":31.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628BLK_0067f393-cfbd-4948-ba74-ca3a59f7f1c5.jpg?v=1786518800"},{"product_id":"powerflex-pff5-4628p-transfer-case-bush-insert-tuned-track-bmw-5-series-f07-gt-2009-2016-road-series-powerflex","title":"Powerflex PFF5-4628P - Transfer Case Bush Insert (Tuned\/Track) - BMW 5 Series F07 GT (2009 - 2016) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628P - Transfer Case Bush Insert (Tuned\/Track) - BMW 5 Series F07 GT (2009 - 2016) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628P\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Tuned\/Track)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628P Transmission Case Bush Insert (Tuned\/Track) is made from our signature Purple 80A material to restrict movement further for Tuned Petrol\/Tuned Diesel vehicles and occasional track use. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676563996\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628P.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843246985541,"sku":"PFF5-4628P-10692C8D","price":28.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628P_57f325c8-1057-4190-ac59-2feffe11c1bb.jpg?v=1786518801"},{"product_id":"powerflex-pff5-4628-transfer-case-bush-insert-standard-bmw-7-series-f01-f02-f03-f04-2008-2015-road-series-powerflex","title":"Powerflex PFF5-4628 - Transfer Case Bush Insert (Standard) - BMW 7 Series F01, F02, F03, F04 (2008 - 2015) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628 - Transfer Case Bush Insert (Standard) - BMW 7 Series F01, F02, F03, F04 (2008 - 2015) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628 Transmission Case Bush Insert (Standard) is made from our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance on standard Petrol\/Diesel vehicles whilst limiting NVH transmission into the cabin. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676563989\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843311931717,"sku":"PFF5-4628-9B28EB3C","price":28.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628_61eacfd5-dd4e-4b08-a8a3-918d9d9ccb63.jpg?v=1786519455"},{"product_id":"powerflex-pff5-4628blk-transfer-case-bush-insert-motorsport-bmw-7-series-f01-f02-f03-f04-2008-2015-black-series-powerflex","title":"Powerflex PFF5-4628BLK - Transfer Case Bush Insert (Motorsport) - BMW 7 Series F01, F02, F03, F04 (2008 - 2015) - Black Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628BLK - Transfer Case Bush Insert (Motorsport) - BMW 7 Series F01, F02, F03, F04 (2008 - 2015) - Black Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628BLK\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Motorsport)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628BLK Transmission Case Bush Insert (Motorsport) is made from our stiffest 95A Black Series material for Motorsport use, providing a no-compromise performance option for track-focused builds. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676564009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628BLK.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843312030021,"sku":"PFF5-4628BLK-06D17C96","price":31.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628BLK_5e98427f-1dd7-46c6-94da-4fc547cf6cf6.jpg?v=1786519457"},{"product_id":"powerflex-pff5-4628p-transfer-case-bush-insert-tuned-track-bmw-7-series-f01-f02-f03-f04-2008-2015-road-series-powerflex","title":"Powerflex PFF5-4628P - Transfer Case Bush Insert (Tuned\/Track) - BMW 7 Series F01, F02, F03, F04 (2008 - 2015) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628P - Transfer Case Bush Insert (Tuned\/Track) - BMW 7 Series F01, F02, F03, F04 (2008 - 2015) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628P\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Tuned\/Track)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628P Transmission Case Bush Insert (Tuned\/Track) is made from our signature Purple 80A material to restrict movement further for Tuned Petrol\/Tuned Diesel vehicles and occasional track use. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676563996\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628P.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843312357701,"sku":"PFF5-4628P-E32641A7","price":28.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628P_0ec7c527-3a85-4c0e-9260-7baf07b03fc2.jpg?v=1786519461"},{"product_id":"powerflex-pff5-1526-transfer-case-bush-insert-petrol-bmw-x-series-x1-series-x1-e84-xdrive-2008-2015-road-series-powerflex","title":"Powerflex PFF5-1526 - Transfer Case Bush Insert (Petrol) - BMW X Series X1 Series | X1 E84 xDrive (2008-2015) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-1526 - Transfer Case Bush Insert (Petrol) - BMW X Series X1 Series | X1 E84 xDrive (2008-2015) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-1526\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-1526\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Petrol)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-1526 Transfer Case Bush Insert (Standard) is made from our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance on standard Petrol\/Diesel vehicles whilst limiting NVH transmission into the cabin. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 138\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676565747\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843320680773,"sku":"PFF5-1526-7258E649","price":26.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-1526_e7d43f4d-7793-4543-b1bb-ca9e13caaf54.jpg?v=1786519622"},{"product_id":"powerflex-pff5-1526p-transfer-case-bush-insert-tuned-track-bmw-x-series-x1-series-x1-e84-xdrive-2008-2015-road-series-powerflex","title":"Powerflex PFF5-1526P - Transfer Case Bush Insert (Tuned\/Track) - BMW X Series X1 Series | X1 E84 xDrive (2008-2015) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-1526P - Transfer Case Bush Insert (Tuned\/Track) - BMW X Series X1 Series | X1 E84 xDrive (2008-2015) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-1526P\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-1526P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Tuned\/Track)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-1526P Transfer Case Bush Insert (Tuned\/Track) is made from our signature Purple 80A material to restrict movement further for Tuned Petrol\/Tuned Diesel vehicles and occasional track use. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 138\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676565754\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843320713541,"sku":"PFF5-1526P-79838BEA","price":26.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-1526P_d0b9a37a-9a33-49be-8277-bd545c265792.jpg?v=1786519623"},{"product_id":"powerflex-pff5-1526r-transfer-case-bush-insert-diesel-bmw-x-series-x1-series-x1-e84-xdrive-2008-2015-road-series-powerflex","title":"Powerflex PFF5-1526R - Transfer Case Bush Insert (Diesel) - BMW X Series X1 Series | X1 E84 xDrive (2008-2015) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-1526R - Transfer Case Bush Insert (Diesel) - BMW X Series X1 Series | X1 E84 xDrive (2008-2015) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-1526R\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-1526R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Diesel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-1526R Transfer Case Bush Insert (Diesel) is made from our Red 65A durometer material, providing an excellent balance of strength and compliance for improved performance on standard Diesel vehicles whilst limiting NVH transmission into the cabin. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 138\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676565761\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843320746309,"sku":"PFF5-1526R-1FEE5788","price":26.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-1526R_c759d844-edd4-43b4-a38b-a0730f29e434.jpg?v=1786519625"},{"product_id":"powerflex-pff5-4628-transfer-case-bush-insert-standard-bmw-x-series-x1-series-x1-e84-xdrive-2008-2015-road-series-powerflex","title":"Powerflex PFF5-4628 - Transfer Case Bush Insert (Standard) - BMW X Series X1 Series | X1 E84 xDrive (2008-2015) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628 - Transfer Case Bush Insert (Standard) - BMW X Series X1 Series | X1 E84 xDrive (2008-2015) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628 Transmission Case Bush Insert (Standard) is made from our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance on standard Petrol\/Diesel vehicles whilst limiting NVH transmission into the cabin. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676563989\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843320811845,"sku":"PFF5-4628-A82C48D4","price":28.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628_ace820ba-cfd3-46cf-8a9f-818018494ca3.jpg?v=1786519626"},{"product_id":"powerflex-pff5-4628p-transfer-case-bush-insert-tuned-track-bmw-x-series-x1-series-x1-e84-xdrive-2008-2015-road-series-powerflex","title":"Powerflex PFF5-4628P - Transfer Case Bush Insert (Tuned\/Track) - BMW X Series X1 Series | X1 E84 xDrive (2008-2015) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-4628P - Transfer Case Bush Insert (Tuned\/Track) - BMW X Series X1 Series | X1 E84 xDrive (2008-2015) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-4628P\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-4628P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Tuned\/Track)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-4628P Transmission Case Bush Insert (Tuned\/Track) is made from our signature Purple 80A material to restrict movement further for Tuned Petrol\/Tuned Diesel vehicles and occasional track use. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676563996\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier fitting-instruction reference:\u003c\/strong\u003e Fitting_PFF5-4628P.pdf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843320844613,"sku":"PFF5-4628P-67BD21FF","price":28.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-4628P_a6948f1b-84ec-4f4d-95be-1d628db1d0c8.jpg?v=1786519627"},{"product_id":"powerflex-pff5-1526-transfer-case-bush-insert-petrol-bmw-x-series-x3-series-x3-e83-2003-2010-road-series-powerflex","title":"Powerflex PFF5-1526 - Transfer Case Bush Insert (Petrol) - BMW X Series X3 Series | X3 E83 (2003-2010) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-1526 - Transfer Case Bush Insert (Petrol) - BMW X Series X3 Series | X3 E83 (2003-2010) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-1526\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-1526\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Petrol)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-1526 Transfer Case Bush Insert (Standard) is made from our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance on standard Petrol\/Diesel vehicles whilst limiting NVH transmission into the cabin. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 138\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676565747\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843332444485,"sku":"PFF5-1526-37957393","price":26.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-1526_5ddaa409-1240-4e71-8377-57aa090be503.jpg?v=1786519725"},{"product_id":"powerflex-pff5-1526p-transfer-case-bush-insert-tuned-track-bmw-x-series-x3-series-x3-e83-2003-2010-road-series-powerflex","title":"Powerflex PFF5-1526P - Transfer Case Bush Insert (Tuned\/Track) - BMW X Series X3 Series | X3 E83 (2003-2010) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-1526P - Transfer Case Bush Insert (Tuned\/Track) - BMW X Series X3 Series | X3 E83 (2003-2010) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-1526P\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-1526P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Tuned\/Track)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-1526P Transfer Case Bush Insert (Tuned\/Track) is made from our signature Purple 80A material to restrict movement further for Tuned Petrol\/Tuned Diesel vehicles and occasional track use. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 138\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676565754\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843337949509,"sku":"PFF5-1526P-C3639F26","price":26.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-1526P_cc51cd0d-2e3b-49cf-a7f1-a89ad7f6c693.jpg?v=1786519726"},{"product_id":"powerflex-pff5-1526r-transfer-case-bush-insert-diesel-bmw-x-series-x3-series-x3-e83-2003-2010-road-series-powerflex","title":"Powerflex PFF5-1526R - Transfer Case Bush Insert (Diesel) - BMW X Series X3 Series | X3 E83 (2003-2010) - Road Series","description":"\u003cp\u003e\u003cstrong\u003ePowerflex PFF5-1526R - Transfer Case Bush Insert (Diesel) - BMW X Series X3 Series | X3 E83 (2003-2010) - Road Series\u003c\/strong\u003e is identified by exact manufacturer part number \u003cstrong\u003ePFF5-1526R\u003c\/strong\u003e. This record has been reconciled to the current UK Powerflex supplier catalogue. No vehicle compatibility, included-component or certification claims have been inferred.\u003c\/p\u003e\u003ch2\u003eVerified product details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Powerflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e PFF5-1526R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product description:\u003c\/strong\u003e Transfer Case Bush Insert (Diesel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier product notes:\u003c\/strong\u003e PFF5-1526R Transfer Case Bush Insert (Diesel) is made from our Red 65A durometer material, providing an excellent balance of strength and compliance for improved performance on standard Diesel vehicles whilst limiting NVH transmission into the cabin. An increase in NVH, usually at idle, should be expected when stiffening the mount between the transmission and chassis. The harder the material, the greater the NVH transmitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed weight:\u003c\/strong\u003e 138\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed pack size:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\/GTIN:\u003c\/strong\u003e 5055676565761\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-listed series:\u003c\/strong\u003e road\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and ordering\u003c\/h2\u003e\u003cp\u003eConfirm the exact manufacturer part number and vehicle application before ordering. Compatibility may depend on build date, engine, transmission, chassis or fitted options. If uncertain, contact Torque Monsta with the vehicle registration or VIN and this part number.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse the product only for its intended application and arrange installation by a competent person. Product-specific settings, torque values, road-use status and included components are stated only where supported by manufacturer evidence.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":58843342602565,"sku":"PFF5-1526R-5B95B717","price":26.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/files\/PFF5-1526R_04081ace-83ce-431b-b5c9-14baa1a1c463.jpg?v=1786519727"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/6729\/6069\/collections\/170367_1.jpg?v=1787077331","url":"https:\/\/www.torquemonsta.store\/collections\/transfer-case-and-haldex-components.oembed","provider":"Torque Monsta Automotive LLP","version":"1.0","type":"link"}